Electrical Services – Repairs – New Installation

• September 17, 2020
• Richard Branson
• Leave a comment

Electrical Services – Repairs – New Installation

Do you come across frequent electrical issues in your home? Do you feel your electrician is quite expensive? Electricians charge you money even for a minor electrical issue. Most of the electrical issues in your house are minor. You can resolve it on your own if you have proper knowledge about electrical connectivity, diagnosis, and troubleshooting. On the other hand, if you aren’t aware of electrical issues, it is always better to seek the help of an expert electrician. As you read on, you can get to know the most common electrical issues and tips for resolving them on your own, provided you have minimal electrical knowledge.

Blown Fuses: Blown fuse is the most common issue that you might across in your house. A fuse is the thick metal strip in a circuit, which allows the current to pass through it. When too much of the current flows through the fuse, the metal strip starts melting down. As a result, the current turns off. Usually, there are three types of fuses Plug and Type S fuses, cartridge fuses, and time-delay fuses. When you replace the fuse, make sure to replace it with a fuse of the same type and rating. Never use a fuse that has a higher rating than the existing one. Before changing the blown fuse, you need to shut off the main power supply. Then replace the blown fuse with a new one, place it back on the circuit and then switch it on.

Switches: Are you facing issues with certain switches in your house? Electricians can easily resolve an issue related to switches. If the electrician isn’t in your reach, you can replace the switch yourself. Basically there are three types of switches single-pole, a three-way switch, and dimmer switches. Before you purchase a new switch, you need to go through the information printed back of it. Make sure that it is of the same voltage and ampere as that of the previous one back in your home. Before you start any electrical work, always make sure to switch off the main power supply.  In addition to that make use of tester in order to make sure that the circuit is dead. Then replace the new switch in the same manner as the previous switch was.

Diagnosing the electrical issue: Your ability to diagnose the issue can be helpful to you and even the electrician to troubleshoot it easily. Over the phone, if you inform the electrician about the actual electrical issue in your home, the electrician can come prepared with the tools and other accessories that are needed.
The most common issues in houses are short circuit, overload, and faulty connections. The overload circuit ends up in a blown fuse. As more numbers of appliances or lamps are turned on, the wiring gets overheated and the fuse blows off. A short circuit happens when the bare hot wire gets in contact in bare grounded or neutral wire.  Once you diagnose the issue you can resolve it appropriately. So, even if you aren’t in reach of an electrician, you can resolve a few minor electrical issues on your own.  If there is an electrician nearby then you may prefer getting the issue resolved by the electrician.

This Blog was posted for you By Good Electric in San Antonio